Zebra 10015345 Z-Select 4000D 4" x 4" Direct Thermal Labels, 12 Rolls/Case
Part 10015345
Zebra 10015345 Z-Select 4000D labels provide a square 4" x 4" format for shipping, product identification and indoor warehouse labeling. Smooth coated white direct thermal paper prints without a ribbon, while permanent all-temperature acrylic adhesive supports a range of application environments. Perforated stock allows easy separation during daily labeling tasks.
Priced per case of 12 rolls. Each roll contains 700 labels, totaling 8,400 labels per case. Rolls have a 1" core and a 5" outer diameter. No thermal transfer ribbon is required.
Product specifications
- Manufacturer: Zebra
- Part number: 10015345
- Series: Z-Select 4000D
- Print method: Direct thermal; no ribbon required
- Label width: 4" (101.6 mm)
- Label length: 4" (101.6 mm)
- Material: White smooth coated direct thermal paper
- Adhesive: Permanent all-temperature acrylic-based adhesive
- Core diameter: 1" (25.4 mm)
- Roll outer diameter: 5" (127 mm)
- Labels per roll: 700
- Rolls per case: 12
- Labels per case: 8,400
- Perforated: Yes
Material construction and printing
Z-Select 4000D combines a 3.2 mil white coated direct thermal paper facestock, a 0.8 mil acrylic adhesive layer and a 2.3 mil, 40 lb. semi-bleached kraft liner. Total construction thickness is 6.3 mil ±10%. Zebra rates the material for good print quality at speeds up to 10 inches per second; actual results depend on printer capability, settings and label design.
Applications
Use the square format for shipping identifiers, product barcodes, compliance information, work-in-process tracking and adhesive pallet identification labels. Confirm that the 4" x 4" layout accommodates the information and barcode requirements of your workflow. The material has limited resistance to moisture and abrasion and is not recommended for outdoor use.
Temperature and storage
- Minimum application temperature: -20°F (-29°C)
- Service temperature range: -65°F to 140°F (-54°C to 60°C)
- Optimal storage conditions: 72°F (22°C) at 50% relative humidity
The minimum application temperature describes conditions when attaching the label. The service range describes exposure after application, not the temperature at which labels can first be attached. Pre-test adhesion and print readability on your intended surface under actual operating conditions.
Printer fit
Choose a direct thermal printer that accepts the media width, 1" core, 5" roll diameter and material thickness. Check the exact model's media sensing and handling requirements. A printer's nominal print width alone does not establish roll compatibility. These labels print directly using heat and do not use a thermal transfer ribbon.
Exposure limitations
This paper material offers limited moisture and abrasion resistance. Window cleaner, alcohol, ammonia, bleach, IPA, gasoline, grease, oil, acetone, MEK, TCE and xylene are not recommended exposures. Choose media designed for harsher conditions when solvent resistance, heavy handling or outdoor exposure is required. Pre-test the labels for the intended application.
Frequently asked questions
What size are Zebra 10015345 labels?
Each individual label measures 4" wide by 4" long (101.6 x 101.6 mm).
How many labels are included?
Each roll contains 700 labels. A case contains 12 rolls, for a total of 8,400 labels.
Do these labels require a ribbon?
No. Z-Select 4000D is direct thermal paper and prints without a thermal transfer ribbon.
Are these labels perforated?
Yes. Zebra 10015345 is perforated for easy separation.
Will these fit any 4-inch printer?
The printer must support direct thermal printing and accept the media width, 1" core, 5" outer diameter and material thickness. Verify sensing and handling requirements for the exact model.
What is the maximum material print speed?
Zebra specifies good print quality up to 10 inches per second for Z-Select 4000D material. Your printer and application may require a lower speed.
Can these labels be applied at -65°F?
No. The minimum application temperature is -20°F (-29°C). The -65°F service rating is not an application temperature.
Are these labels waterproof or suitable outdoors?
No. The material has limited moisture and abrasion resistance and is not recommended for outdoor use.
How should unused rolls be stored?
Optimal storage conditions are 72°F (22°C) at 50% relative humidity.
| Manufacturer | Zebra |