Zebra 10010037 Z-Select 4000D 1.2" x 0.85" Direct Thermal Labels, 6 Rolls/Case
Part 10010037
Zebra 10010037 Z-Select 4000D labels are compact 1.2" x 0.85" white direct thermal paper labels for small-product identification and indoor labeling. Smooth coated paper prints without a ribbon, while permanent all-temperature acrylic adhesive supports everyday labeling tasks. Perforations make labels easy to separate.
Each case contains 6 rolls of 2,710 labels, totaling 16,260 labels. Rolls have a 1" core and a 5" outer diameter. Check your exact printer's media specifications before ordering.
Product specifications
- Brand: Zebra
- Part number: 10010037
- Secondary part number: DT1208-5
- Media series: Z-Select 4000D
- Print method: Direct thermal; no ribbon required
- Label width: 1.2" (30.48 mm)
- Label length: 0.85" (21.59 mm)
- Material: White smooth coated direct thermal paper
- Adhesive: Permanent all-temperature acrylic-based adhesive
- Core diameter: 1" (25.4 mm)
- Roll outer diameter: 5" (127 mm)
- Labels per roll: 2,710
- Rolls per case: 6
- Total labels per case: 16,260
- Perforated: Yes
Coated paper and ribbon-free printing
Z-Select 4000D combines a 3.2 mil coated direct thermal paper facestock, a 0.8 mil adhesive layer and a 2.3 mil, 40 lb. semi-bleached kraft liner. Total construction thickness is 6.3 mil ±10%. Zebra specifies good print quality at speeds up to 10 inches per second for this material. Actual operating speed depends on printer capability, settings and label design.
Compact identification and laboratory use
The small label face suits concise identification text and appropriately sized barcodes on small products. For specimen tubes or vials, pre-test label fit and adhesion on the exact container under intended handling and temperature conditions. This paper material is not recommended for exposure to blood, body fluids, alcohol or harsh laboratory chemicals. Choose purpose-designed laboratory media where these exposures are expected.
Printer compatibility
Use a direct thermal printer that supports the media width, 0.85" label length, 1" core, 5" roll outer diameter and material thickness. Verify minimum label length, sensing and dispensing or cutting requirements for the exact printer configuration. Nominal print width alone does not establish compatibility. Contact us for help checking fit before ordering.
Temperature and storage
- Minimum application temperature: -20°F (-29°C)
- Service temperature: -65°F to 140°F (-54°C to 60°C)
- Optimal storage: 72°F (22°C) at 50% relative humidity
Application temperature applies when attaching the label. Service temperature describes exposure after application, not the permitted initial application temperature. Pre-test adhesion and print readability on your intended surface under actual operating conditions.
Exposure limitations
This paper material has limited moisture and abrasion resistance and is not recommended for outdoor use. Blood, body fluids, window cleaner, alcohol, ammonia, bleach, IPA, gasoline, grease, oil, acetone, MEK, TCE and xylene are not recommended exposures. Select more durable media for chemical contact, heavy abrasion or outdoor environments.
Frequently asked questions
What size are Zebra 10010037 labels?
Each label is 1.2" wide by 0.85" long (30.48 x 21.59 mm).
How many labels are included in a case?
A case includes 6 rolls of 2,710 labels, totaling 16,260 labels.
Do these labels need a ribbon?
No. Direct thermal printing uses heat to create the image without a thermal transfer ribbon.
Are these labels perforated?
Yes. The perforated format allows easy separation.
Will they fit any Zebra printer?
Check the exact model and configuration. It must support direct thermal printing and accept the media width, 0.85" label length, 1" core, 5" roll diameter and material thickness. Check sensing and media-handling limits as well.
Can these be used on specimen tubes or vials?
Pre-test adhesion and fit on the exact container under intended conditions. The material is not recommended for exposure to blood, body fluids, alcohol or the other listed chemicals. Use purpose-designed media when those exposures are expected.
What print speed is supported?
Zebra specifies good print quality up to 10 inches per second for Z-Select 4000D material. Your printer, settings and label design may require a lower speed.
Can they be applied at -65°F?
No. Minimum application temperature is -20°F (-29°C). The -65°F lower service limit describes exposure after application.
Are these labels waterproof or suitable outdoors?
The material has limited moisture and abrasion resistance and is not recommended for outdoor use.
How should unused rolls be stored?
Optimal storage conditions are 72°F (22°C) at 50% relative humidity.
| Manufacturer | Zebra |