Zebra 800274-305 Z-Select 4000T labels combine a 4" x 3" format with ultra-smooth, white topcoated paper and permanent acrylic adhesive. The wide label face provides space for product barcodes, packaging identifiers and inventory information in indoor warehouse, retail and manufacturing workflows. A compatible thermal transfer ribbon is required and sold separately.

Each case contains 12 rolls of 930 labels, totaling 11,160 labels. Rolls have a 1" core and a 5" outer diameter.

Product specifications

• Manufacturer: Zebra
• Part number: 800274-305
• Secondary reference: TT4030-5
• Series: Z-Select 4000T
• Print method: Thermal transfer
• Label width: 4" (101.6 mm)
• Label length: 3" (76.2 mm)
• Material: White, smooth topcoated paper
• Adhesive: Permanent acrylic-based adhesive
• Core diameter: 1" (25.4 mm)
• Roll outer diameter: 5" (127 mm)
• Labels per roll: 930
• Rolls per case: 12
• Labels per case: 11,160
• Perforated: Yes
• Ribbon: Required; sold separately

Material construction

Z-Select 4000T combines a 2.7 mil white topcoated paper facestock, a 0.5 mil permanent acrylic adhesive layer and a 2.5 mil, 40 lb. semi-bleached kraft liner. Total construction thickness is 5.7 mil ±10%. Its ultra-smooth surface supports high-quality thermal transfer printing, including high-speed applications with a suitable ribbon and printer setup.

Applications

Use the 4" x 3" format for packaging identification, product identification, inventory barcodes, work-in-process tracking and compliance-label workflows. Match the label layout to your software and required information. This paper material is intended for indoor use and is not recommended for outdoor exposure.

Temperature and storage

• Minimum application temperature: 30°F (-1°C)
• Service temperature range: -65°F to 200°F (-54°C to 93°C)
• Optimal storage conditions: 72°F (22°C) at 50% relative humidity

Application temperature describes conditions when attaching the label. Service temperature describes exposure after application; the lower service rating is not a cold-surface application rating. Pre-test adhesion and print readability on the intended surface under actual operating conditions.

Printer fit and ribbon selection

Select a thermal transfer printer that accommodates the media width, 1" core, 5" roll diameter and material thickness. Check the exact model's media sensing and ribbon requirements; print width alone does not establish roll compatibility. Use a compatible wax or wax/resin ribbon in the correct dimensions, core and winding for your printer. Zebra's material sheet evaluates the 2000, 6000 and 6100 ribbon families; choose the appropriate ribbon configuration for your equipment and application.

Exposure guidance

Test the complete label-and-ribbon combination for the intended end use. Alcohol, ammonia, bleach, IPA, gasoline, grease, oil, acetone, MEK, TCE and xylene are not recommended exposures with the ribbon combinations evaluated in the material sheet. These paper labels are not a substitute for solvent-resistant or outdoor-rated media.

Frequently asked questions

What size is Zebra 800274-305?

Each individual label measures 4" wide by 3" long (101.6 x 76.2 mm).

How many labels are included?

Each roll contains 930 labels. A case contains 12 rolls, for a total of 11,160 labels.

Does this label require a ribbon?

Yes. Zebra 800274-305 is thermal transfer label stock and requires a compatible ribbon, sold separately.

What are the roll dimensions?

Each roll has a 1" core and a 5" outer diameter. Your printer must accommodate both dimensions and the media width.

Are these labels perforated?

Yes. Zebra 800274-305 is supplied as perforated label stock.

Will these fit any 4-inch Zebra printer?

The printer must support thermal transfer printing, the media width, a 1" core and a 5" roll diameter. Check its sensing and ribbon requirements for the exact configuration.

Can these labels be used outdoors?

Z-Select 4000T paper is not recommended for outdoor use. Choose outdoor-rated media for exterior exposure.

Can labels be applied at -65°F?

No. The minimum application temperature is 30°F (-1°C). The lower service-temperature rating is not an application temperature.