Zebra 10018351 Z-Perform 1500T 4" x 2" Thermal Transfer Labels, 4 Rolls/Case

Zebra 10018351 Z-Perform 1500T is a 4" x 2" thermal transfer paper label with permanent acrylic adhesive for indoor packaging identification and work-in-process tracking. Its wide, compact format provides space for barcodes and product information without a longer label face. A compatible thermal transfer ribbon is required and sold separately.

Sold as a case of 4 rolls, with 3,000 labels per roll. Each roll has a 3" core and an 8" outer diameter.

SKU specifications

• Part number: 10018351
• Secondary reference: T15-4020-8
• Series: Z-Perform 1500T
• Print method: Thermal transfer
• Label width: 4" (101.6 mm)
• Label length: 2" (50.8 mm)
• Core diameter: 3" (76.2 mm)
• Outer diameter: 8" (203.2 mm)
• Labels per roll: 3,000
• Rolls per case: 4
• Perforation: Listed as perforated in the existing SKU information; not independently verified by the material-family sheet.

Material construction

• Facestock: White smooth topcoated paper, 2.6 mil
• Adhesive: Permanent acrylic-based adhesive, 0.6 mil
• Liner: 40 lb. semi-bleached kraft stock, 2.4 mil
• Total thickness: 5.6 mil, ±10%

Material construction is based on the supplied Z-Perform 1500T family sheet. It does not identify SKU 10018351 or independently verify roll dimensions, packaging or perforation. SKU details above retain this listing's existing information. Material suitability for fanfolding does not mean this roll SKU is supplied fanfolded.

Temperature and storage

• Minimum application temperature: 25°F (-4°C)
• Service temperature: 0°F to 180°F (-18°C to 82°C)
• Optimal storage: 72°F (22°C) at 50% relative humidity
• Outdoor use: Not recommended

Application temperature applies when placing the label. Service temperature describes conditions in use, not storage recommendations. Test adhesion on the intended surface under actual operating conditions.

Printing and printer fit

Zebra recommends Z-Perform 1500T material for printing applications up to 14 inches per second. This is material-level guidance, not a guaranteed operating speed for every printer, ribbon or barcode design. Validate print settings and barcode readability before production.

Zebra 6000, 2000 and 6100 ribbons appear in the material sheet's testing guidance. Select a ribbon format compatible with your exact printer and application. Verify support for label width, 3" core, 8" roll diameter, thickness and media sensing requirements. A 4" print width alone does not confirm roll compatibility.

Suggested applications

The material family is intended for packaging-material identification and work-in-process labeling. Use for indoor product identification and inventory workflows where paper labels and permanent adhesive suit the surface and environment. Do not assume the 4" x 2" format meets every shipping or prescribed label-layout requirement.

Frequently asked questions

Does Zebra 10018351 need a ribbon?

Yes. These are thermal transfer labels, not direct thermal labels. Ribbon is required and sold separately.

How many labels are supplied?

A case contains 4 rolls, with 3,000 labels per roll.

Will these labels fit any Zebra industrial printer?

No. Check the exact model's media specifications, including width, core support, maximum roll diameter, thickness and sensing requirements.

Are the labels perforated?

The existing SKU listing states that they are perforated. The supplied family sheet does not verify SKU-specific perforation; confirm construction before ordering if tear-off separation is essential.

Can they be used outdoors?

The manufacturer does not recommend Z-Perform 1500T for outdoor use.

Are they smear- or chemical-resistant?

Print durability depends on ribbon selection, settings and exposure conditions. Test the actual label and ribbon combination rather than assuming universal smear or chemical resistance.

No downloads available for this product.

Request a Quote